last post from CapFuture1975 at the
Did you installed it in the right direction?
You have to close all "24" Jumpers! Also on the bottom side.
Your Superkernal has only 23 Pins. On one side one pin is missing.
Did you installed it in the right direction?
Hi thanks for the quick reply, yes the chip was put in the right direction
I bought the kit already assembled for c64 and sx-64 (24 pin)
I noticed that a pin was missing but I thought it was normal, so I proceed to add the pin and try everything again
I'll keep you posted and thank you very much for your replies
Greetings, and have a nice day 
Display MoreI bought the kit already assembled for c64 and sx-64 (24 pin)
I noticed that a pin was missing but I thought it was normal, so I proceed to add the pin and try everything again
I'll keep you posted and thank you very much for your replies
Greetings, and have a nice day
Don't forget to close the jumper on the bottom side of the SK64:
Display MoreDisplay MoreI bought the kit already assembled for c64 and sx-64 (24 pin)
I noticed that a pin was missing but I thought it was normal, so I proceed to add the pin and try everything again
I'll keep you posted and thank you very much for your replies
Greetings, and have a nice day
Don't forget to close the jumper on the bottom side of the SK64:
Hi, I have closed a jumper and ceck with tester, then i also contacted GameDude seller and he told me that missing pin is normal.. but unfortunately still not working always black screenIMG_1192.jpg
Superkernal - Aufbauanleitung
Please read the "Aufbauanleitung", the missing pin isn´t normal.
This is what happened to me after I received my SuperKernal. Pressing reset veeeeeery often; eventually you may see the menu. Selecting PLA Timing slow there helped me to make it work.
Superkernal - Aufbauanleitung
Please read the "Aufbauanleitung", the missing pin isn´t normal.
I read the assembly guide on C64 (first model) and SX-64 in fact it doesn't say that the pin is missing it says to solder 12x12 pins and don't connect the last 4
this board i'ts v1.1 possible that the pin should not be soldered?? bho!
I can possibly add the missing pin and do a test
it annoys that I bought a box product ready for c64 and sx-64 and I have to start soldering and testing, ecc
anyway thanks for your support
This is what happened to me after I received my SuperKernal. Pressing reset veeeeeery often; eventually you may see the menu. Selecting PLA Timing slow there helped me to make it work.
But your superkernal was version 1.1 ?
did it have a missing pin?
did he have the jumper on the underside open to be welded as my photo ??
it annoys that I bought a box product ready for c64 and sx-64 and I have to start soldering and testing, ecc
That's what you get when you buy from such dubious sources.
Edit:
By the way, the missing pin is A7 and this pin is necessary for the SuperKernel to work.
Ich dachte, das Superkernal gibt es nirgends zu kaufen? Und eine Neuauflage ist wohl auch nicht geplant. Ebay? 
Da war doch auch ne Quelle in Australien, gelle?
Da war doch auch ne Quelle in Australien, gelle?
Ja und der Threadersteller hat seinen da wohl auch gekauft. Auch wenn es australische Dollar sind, einfach viel zu teuer.
it annoys that I bought a box product ready for c64 and sx-64 and I have to start soldering and testing, ecc
That's what you get when you buy from such dubious sources.
Edit:
By the way, the missing pin is A7 and this pin is necessary for the SuperKernel to work.
I bought a kit of several type of pins on amazon to add it and do another test... 
Thank you very much for replies I appreciate them, I'll let you know and even if I don't solve the problem, if come to Italy and Sicily, I'll offer a beer at all 
unfortunately this seller was the only one who had the latest superKernal on internet
Ich dachte, das Superkernal gibt es nirgends zu kaufen? Und eine Neuauflage ist wohl auch nicht geplant. Ebay?
i found a seller who had the last one
