letzter Beitrag von Schneider-Huetter am
Yeah unfortunately sometimes it does not say why. The diagnostic could have more information. There is a manual, but not sure it really goes into much more detail.
Gibt's ein Foto davon?
Wird NUR U2 als BAD markiert?
Kommt da auch Interrupt BAD?
Sind da CIA 6526 oder CIA6526 A drin?
Sind die geaockelt, sodaß du die Quertauschen könntest?
Bilder sind immer gut! ...
I have a 64 with a missing 6526. If I put an 8520 (Amiga CIA) it will say the 6526 is bad.
i.e. it will say "U1 BAD" when the 8520 is in U2, and "U2 BAD" when the 8520 is in U1!
I don't know if there is a bug in the diagnostic, or it's an anomaly with that situation. Nothing else reports as "BAD".
Dein T.O.D. Signal ist nicht ok.
I have a 64 with a missing 6526. If I put an 8520 (Amiga CIA) it will say the 6526 is bad.
8520 has no TOD but a 24 bit timer instead.
So the "TOD" does not work as expected -> "BAD".
Ich hab zur Zeit keinen CIA zum tausch da
Tausche die 6526 testweise gegeneinander.
I have a 64 with a missing 6526. If I put an 8520 (Amiga CIA) it will say the 6526 is bad.
8520 has no TOD but a 24 bit timer instead.
So the "TOD" does not work as expected -> "BAD".
Expected, but it reports the wrong one is the issue.
but it reports the wrong one is the issue.
Which version of the diag?
There is a definitive bug mistaking U1 and U2 when testing interrupts, IIRC.
I fix that a long while ago. Maybe there is the same bug with TODs, or this is a direct affect of exactly this bug.
but it reports the wrong one is the issue.
Which version of the diag?
There is a definite bug mistaking U1 and U2 when testing interrupts, IIRC.
I fix that a long while ago. Maybe there is the same bug with TODs, or this is a direct affect of exactly this bug.
I know at least I have 568220++ and it reports it backwards for that specific error.
Zitat von Check64 V1.6 release DocsBASE: diag_586220ted_kinzi
MOD: 6 byte patch to swap "U1 BAD" and "U2 BAD" in INTERRUPT TEST (obviously 35++ years old bug)
BASE: diag_586220ted_kinzi_2
MOD: 1 byte patch to correct not printing "INTERRUPT BAD" on interrupt test @94C0: replace RTS(60) by NOP(EA)
Tishima Du vernwendest eine alte Diag-Version ("586220++"), die dürfte den zweiten Bug noch haben.
Durch den kaputten TOD wird kein Interrupt generiert, das buggy Diag zeigt aber versehentlich kein "INTERRUPT BAD" und nur "Ux BAD".
Update hier: Dead Test Rev 781220 Update 002 bis 006
r.cade Might be the same problem with yours.
Alles anzeigenZitat von Check64 V1.6 release DocsBASE: diag_586220ted_kinzi
MOD: 6 byte patch to swap "U1 BAD" and "U2 BAD" in INTERRUPT TEST (obviously 35++ years old bug)
BASE: diag_586220ted_kinzi_2
MOD: 1 byte patch to correct not printing "INTERRUPT BAD" on interrupt test @94C0: replace RTS(60) by NOP(EA)
Tishima You are using an old Diag version ("586220++"), which should still have the second bug.
No interrupt is generated due to the broken TOD, but the buggy diag accidentally shows no "INTERRUPT BAD" and only "Ux BAD".
Update here: Dead Test Rev 781220 Update 002 to 006
r.cade Might be the same problem with yours.
I guess the same fix to dead test needs applied to the "regular" harness diag test (586220)
Alles anzeigenAlles anzeigenZitat von Check64 V1.6 release DocsBASE: diag_586220ted_kinzi
MOD: 6 byte patch to swap "U1 BAD" and "U2 BAD" in INTERRUPT TEST (obviously 35++ years old bug)
BASE: diag_586220ted_kinzi_2
MOD: 1 byte patch to correct not printing "INTERRUPT BAD" on interrupt test @94C0: replace RTS(60) by NOP(EA)
Tishima You are using an old Diag version ("586220++"), which should still have the second bug.
No interrupt is generated due to the broken TOD, but the buggy diag accidentally shows no "INTERRUPT BAD" and only "Ux BAD".
Update here: Dead Test Rev 781220 Update 002 to 006
r.cade Might be the same problem with yours.
I guess the same fix to dead test needs applied to the "regular" harness diag test (586220)
These ARE fixes to Diag.
In the Check64 V1.6 ZIP you'll find this:
3_586220ted_kinzi_4.bin
3_586220ted_kinzi_4.txt
These are based on "586220++" and fix the bugs mentioned in the TXT file.
Alles anzeigenAlles anzeigenAlles anzeigenZitat von Check64 V1.6 release DocsBASE: diag_586220ted_kinzi
MOD: 6 byte patch to swap "U1 BAD" and "U2 BAD" in INTERRUPT TEST (obviously 35++ years old bug)
BASE: diag_586220ted_kinzi_2
MOD: 1 byte patch to correct not printing "INTERRUPT BAD" on interrupt test @94C0: replace RTS(60) by NOP(EA)
Tishima You are using an old Diag version ("586220++"), which should still have the second bug.
No interrupt is generated due to the broken TOD, but the buggy diag accidentally shows no "INTERRUPT BAD" and only "Ux BAD".
Update here: Dead Test Rev 781220 Update 002 to 006
r.cade Might be the same problem with yours.
I guess the same fix to dead test needs applied to the "regular" harness diag test (586220)
These ARE fixes to Diag.
In the Check64 V1.6 ZIP you'll find this:
3_586220ted_kinzi_4.bin
3_586220ted_kinzi_4.txt
These are based on "586220++" and fix the bugs mentioned in the TXT file.
Thank you! Sorry, I thought CheckIt was a different software.
