@gessi hast du das schon versucht?
Hier eine Vorgehensweise fĂĽr das Firmware Update und die .ini
U64e: Tom2 Adapter (1351) probleme
Und auch der Beitrag weiter unten mit
Quote
@gessi hast du das schon versucht?
Hier eine Vorgehensweise fĂĽr das Firmware Update und die .ini
U64e: Tom2 Adapter (1351) probleme
Und auch der Beitrag weiter unten mit
Quote
DafĂĽr ist wohl die neuste FW vom April notwendig.
AuĂźerdem ist vielleicht folgendes hilfreich fĂĽr den U64:
A) Use an empty UsB Stick, and create a directory called MOUSTER onto it.
B) Instead of putting the FW update release 3.12.2019 into the mouster directory, as mentioned in the description, put it into the root directory.
C) Switch on the U64E and afterwards plug the usb stick/mouster combination into port #1. Wait some seconds, and remove the usb stick.
D) edit the created ini file on the USB stick in the mouster directory with setting mode=01 and type=02.
E) Reinsert the usb stick into the mouster plugged into the U64E. The midified ini file will be written into the mouster memory. Done.
Ah stimmt, beim mouSTer stehts ganz unten:
QuoteSupported controllers: Sony DS3 (wired) Sony DS4(wired) Sony DS5(wired) Xbox360(wired) USB Gamepads in general(wired)
Hat das schon jemand ausprobiert?
Gibt es mittlerweile alternative Lösungen?
Ich habe gelesen, man könnte mit dem Ultimate Streamer den C64 Inhalt auf den PC weiterleiten und dort mit einem USB-Joystick spielen? Wie ist denn da der Input-Lag?