Beiträge von mrr19121970 im Thema „Commodore 4064 & Green Screen“

    Könnte auch sein, dass das Ding NTSC ist, und wenn du einen PAL-Monitor mit NTSC Farbsignal fütterst, kommen da nur Graustufen raus.


    Auf der platin fehlt ab werk U6 2114 SRAM (COLOR RAM) und U16 CD4066. Deswegen graustüfen.

    Meine frage hat sich auf der internal monitor bezogen. Ich bin einverstanden das es ist ein monochrome monitor ist aber für mich war monoluminance etwas neu ist. Ich habe greenscale mit verschieden helligkeitsstüfen erwartet. Ich war nicht sicher ob diese an mein KERNEL lag, oder video PCB. Nun weisse ich das der monitor selbst ist schuld, siehe:

    The sync/luma signal is taken direct from the VIC-II to an external
    board which splits out the hsync, vsync and video-on signal expected by
    the PET monitor. This has the effect of black being 'off' and any other
    colour 'on', so no luminance variance.

    OK, Google was my friend....

    Bitte melde dich an, um diesen Link zu sehen.
    The sync/luma signal is taken direct from the VIC-II to an external
    board which splits out the hsync, vsync and video-on signal expected by
    the PET monitor. This has the effect of black being 'off' and any other
    colour 'on', so no luminance variance. Playing games can be challenging
    but is usually OK if the background is predominantly black. As a test, I
    ran 'Edge of Disgrace' which runs although many of the effects look
    rather unexciting on the PET monitor. On the 326298 board, the composite
    signal is generated outside of the modulator so there is still a signal
    on pin-4 of the AV port which includes the luminance, but the lack of
    the colour RAM still messes up many screens.

    diese pcb kommt von mainboard nach intern monitor. Kernel is 901246-01

    Bitte melde dich an, um diesen Anhang zu sehen.


    Bitte melde dich an, um diesen Link zu sehen.

    Bitte melde dich an, um diesen Link zu sehen. 2009-08-188192This 8-kilobyte ROM has been reported in various machines (4064, PET64, EDUCATOR64), which are versions of the Commodore 64 built in a PET case with an integrated monochrome monitor. The system interrupt routine resets sprite, background and border colors to black unless the high-order bit of the location 646 (cursor colour, 286) is set. Using any colour command resets location 646 and, therefore, the colors.

    Ich habe ein Commodore 4064 (PET 64). Mit eingebaute video habe ich grün auf schwarz, aber auf external video habe ich greyscale. Ich frage mich warum, und kann diese sich ändern ? Liegt es auf der KERNEL oder diese interne video Anschluss selbst ?

    Bitte melde dich an, um diesen Anhang zu sehen.Bitte melde dich an, um diesen Anhang zu sehen.Bitte melde dich an, um diesen Anhang zu sehen.