Beiträge von camper im Thema „Adoom und ECS???“

    REQUIREMENTS:
    -------------

    A 68020+ Amiga running at least OS 3.0, with at least about 4 Mb of
    fastmem.

    ADoom works with gfx-cards, or with AGA or ECS (EHB) using C2P.

    Unless you have 68040+, you should have an ECS or AGA Agnus chip or a
    gfx-card. Theoretically the combination of 68020 or 68030 with OCS
    won't work because OCS Agnus can't do long blits used by the 020/030
    C2P routine. On the other hand, two different people wrote to me that
    ADoom worked just fine for them with 68020/30 + OCS --- weird.

    A Zorro3 (or faster) graphics card, CyberGraphics, at least 8 Mb
    fastmem and a 68040+ are recommended.

    A 68040+ and ethernet are recommended for networking.

    I use a stack size of 150000 bytes, but that's probably overkill. I
    don't know what the stack requirements really are yet. It's almost
    certainly less than 4096 bytes (because it worked OK from the icon
    when I forgot to set the stacksize).

    An FPU is neither required nor used (except on 68060). ADoom should
    also work on FPU-less 68060s (untested).

    An MMU is neither required nor used (except -mmu option on 68040/68060).

    --------------------------------------------------------------------
    | YOU NEED TO GET A MAIN WAD FILE THAT WORKS WITH LINUX DOOM AND |
    | PUT IT IN THE SAME DIRECTORY AS ADOOM. |
    --------------------------------------------------------------------

    Otherwise you get the message: "Error: W_InitFiles: no files found"


    ------------------------------------------------

    erfüllst du die ?