Beiträge von adtbm im Thema „My Devkit has arrived!“

    Hi @abraX-Xious ,

    the first point, the MEGAmaze is a demo. we know that it tends to hang from time to time. (we're still investigating why)

    Regarding the commando tune beeing too fast, it might be, that your machine is set to NTSC. Try holding ALT key, while powering MEGA65 and change the Default video mode over there.

    You can also change the video mode in the Freezer menu. Once your MEGA65 has booted press and hold RESTORE fore about 0.5s this enters the Freezer and press V over there to change video mode.

    To check if your MEGA65 is behaving normaly, try the following:

    Hold the MEGA key (bottom left) pressed while switching MEGA65 on. This boots the MEGA65 C64 mode. once in C64 mode try to LOAD"$",8 and LIST

    is the MEGA65 accessing the disc image of the SD normally ?

    Please report and thanks !

    Hi @abraX-Xious,

    first of, Congratulations, you have the DevKit numero uno !!!

    - The Dipswitch setting on the programmer is still valid.

    - we already heard, that some programmer were mounted some weren't...

    - nice that you got the keyboard connector working (that was the first DevKit reported of a squeezed keyboard connector)

    - for the missing back panel, please send a message to: info@plexilaser.de together with you case serial number. they will send the missing piece.

    - please send pictures once the DevKit is assembled and have a look through my signature. you'll find links to the most important MEGA65 sites there.

    and of course: WELCOME !!!

    Yes, we tested this yesterday and Paul is already on it to write a small Hickup file, when copied to the SD card will solve the problem

    until we release a new bitstream. so solution is on the way.

    wins4 :

    Does it make noises, when powering the MEGA65 on ? or when loading something from SD ?

    Did you change in MEGA65 Configure (holding ALT while powering on and pressing 1) from SD to internal drive ?

    (You can have (atm) only one. either internal SD or internal Floppy drive)

    @Carlos64 ,

    Hi and thanks for the feedback. We are so happy, that you like the machine as much as we do.

    Thanks for fixing the broken parts ! we are surprised as well, that during the assembly so many small parts of the case break.

    We are not sure if the material is to thin, since we didn't had any problems during the assembly, only during the postage.

    Once the case is assembled it is very sturdy, but it seems now, that the assembly is tricky.

    Hi remz !

    The power supply comes shipped with changeable plug adapters and the power supply itself takes voltages from 110V - 230V AC.

    So you should be able to just plug&play. (After you've build the case together) :wink:

    Please check the news on Bitte melde dich an, um diesen Link zu sehen. i've opened

    btw, if you send me your Serial code that came with the package, please send me this code via PM !

    Also we would be interested in pictures, because tbh we haven't seen the complete package.

    So please post pictures !!! :smile: