Hat jemand die iec burst mit einem sd2iec probiert?
Beiträge von soegaard
-
-
Bitte melde dich an, um diesen Link zu sehen. geschrieb:
Welcome from Denmark and nice that it works nowDanke!
Bitte melde dich an, um diesen Link zu sehen.iesel geschrieb:
Respect - that's the part that I considered "not worth exploring", as it's a bit too complicated for the average customer.
The part that's puzzling is that you did not manage to upload the kernal using serial.
Now that you have the driver in the system, it's not going to be easy to re-test this.I agree that Serial is the best option for an average user - it does seem as though something is wrong with uploading files using xmodem. It is not that hard to uninstall the Prolific drivers though. I think removing a couple of files from /System/Library/Extensions/ is enough.
-
Success!
I gave up on using the Serial program (which does not use the Prolific drivers - it has its own set of drivers).
Installed the prolific drivers version 1.6.1 again.
This time I used good old "screen" and used "lrzsz" to transfer the bin file./lrzsz-0.12.20/src/lsz -X /j64.bin
The command to start screen was:
screen /dev/cu.usbserial 19200,cs8
Now choose upload roms and choose rom 1.
When you are told to transfer using xmodem press ctrl+A
then write:exec !! lsz -X /j64.bin
I had a problem with lsz finding my binary, so I put it /j64.bin but another place would be better.
The program lsz is from lrzsz-0.12.20 which were compiled according to the install file.
-
Hallo Alle,
Ich habe die C64 Reloaded MK2 gekauft und installiert.
Die Machine funktioniert und die Bild ist gut (mit der richtige Kabel).Jetzt die Probleme. Ich moechte eine kernel uploaden.
An meine mac habe ich die program Serial und die usb-bis-seriel verbindung ist gefunden.Ich have U (Upload Roms) und danach 1 (Upload custom kernal ROM image 1 (8kb))
gevaehlt. Im menu "File" habe ich "Send File..." genommen and dann habe ich
die 8k bin file gevaehlt. Die Protokol ist XModem. Die problem ist das ich keine
neues prompt gibt. Nach ein bischen warten die fehler "timeout" kommt.Ich habe nich die Prolific treiber installiert - wenn die Prolific treiber ist installiert
dann kan Serial nicht starten.Meine log is druben.
Mehre info bis Serial:
Name USB-Serial Controller
USB ID 067b:2303:0400
Chip PL2303 HXD/EA/RA/SA
Driver Built-In ProlificNote (Bitte melde dich an, um diesen Link zu sehen. ) sagt:
Prolific PL2303 Device Compatibility Notes
Serial works well with all USB to Serial adapters based on the Prolific PL2303 chip, even if you are running El Capitan.
However, you may run into problems if you have an outdated or incompatible driver installed on your system. If you're using an incompatible driver, the most common symptom you'll experience is the device seems to open okay, but no data can be sent or received. Other, less common problems increase in severity all the way up to a full-blown kernel panic, which crashes your entire computer.
If you are having trouble, open the Settings panel and click on the Device Info tab. If you see you're using the "Built-In" driver, you are using Serial's built-in support and the problem may lie elsewhere./Jens Axel
Code
Alles anzeigen------------------------------------------------------------ A - Audio output B - IEC burst option D - Remote debugging F - Factory tests I - Chipset info K - Configure Keys (RESTORE and RESET/POWER) L - Load default settings M - Memory and ROM selection R - Reset machine S - Stereo SID options T - TOD clock frequency U - Upload ROMs W - Write settings Z - Reinitialize memory and reload ROM images from flash ? ------------------------------------------------------------ Upload ROMs ------------------------------------------------------------ 1 - Upload custom kernal ROM image 1 (8kb) 2 - Upload custom kernal ROM image 2 (8kb) 3 - Upload custom kernal ROM image 3 (8kb) C - Upload custom character ROM (4kb) E - Upload extra image (8kb) X - Exit menu ?Ready to receive image with XMODEM protocol. Use 'send file' command in terminal program. Press X to abort