Beiträge von Thierry

    Hi guys, I have a problem with the USB2LAN from a long, long time, I use the USB2LAN from Plugable


    Bitte melde dich an, um dieses Bild zu sehen.

    Bitte melde dich an, um dieses Bild zu sehen.

    It worked for me for a while but I don't remember from which version, I don't know what update I did and the file upload stopped working, when I want to read the files via FTP it has no problem and it works, but when I want to record something inside the Ultimate 2 (no plus ) the network goes down, stop pinging, I tried to downgrade to 2.6k but it does not detect USB2LAN, install firmware 3.07b (the network did not work) after installing 3.5a (the network worked there but with the same problem), I tried with three Plugable USB2LANs, it did the same in all of them, at some point it worked, I suppose in the first firmwares, but later it makes me that problem, telnet it works, I tried several miniSD, FAT32 and NTFS and it does the same, Thanks in advance.

    Good morning people, first of all I apologize for writing in English, the translator was a disaster and did not translate well in other languages, I come to leave information on this project.

    BBS Multimedia for Commodore 64, TURBO56k!


    Bitte melde dich an, um dieses Bild zu sehen.

    Bitte melde dich an, um dieses Bild zu sehen.

    Bitte melde dich an, um dieses Bild zu sehen.

    Bitte melde dich an, um dieses Bild zu sehen.


    Here we are going to show a Drean Commodore 64 with WIFI running at a whopping speed of "57600 bps", developed by Pastbytes

    This BBS is based on Server -> Client, the server runs Python (Windows, Linux, Rasperry PI), in the client we are going to use the Retroterm program which is a terminal programmed especially for this new protocol called TURBO56K

    In the video there is also added a voice module also developed by Pastbytes, but the BBS works without the module.


    Bitte melde dich an, um dieses Medienelement zu sehen.


    Game server? Yes! , the server loads games via remote at maximum speed

    Spotify64? of course! , there is no limit on the audio sending, in the future a list of songs can be generated and listened to on c64 and without time limit.

    Multimedia server, it works! , the server can send images all the time one image after another with the time limit that we want, that could be scheduled in the not too distant future.


    Bitte melde dich an, um dieses Medienelement zu sehen.


    "The source code will be available in its entirety" in a very short time, to be able to follow the development of the bbs in python so with the help of the community some improvements could be made such as, Multiple Node, better stability on the side of the server etc.

    In one of the experiments I ended up including in the terminal the streaming of 4-bit PCM audio (digitized audio) at 11KHz, that the BBS transmits it at 57600 bps and the terminal receives it and places it almost in real time in the volume of the SID , to achieve live audio playback with no duration limit.

    The Terminal is somewhat particular, it works only at 57600 bps and only as a PETSCII terminal (with Commodore characters, no ANSI or even ASCII). Normally it works at a speed equivalent to 1500 bps in PAL and 1800 bps in NTSC.

    In the video the streaming can be seen at the start of the BBS, when it emits the welcome audio. You can see the speed of text reception, and turbo modes with screen off receiving bitmap images direct to memory.

    The Wifi modem is based on Zimodem and has some modifications

    For more information do not hesitate to visit the official thread and write in any language

    Bitte melde dich an, um diesen Link zu sehen.


    The LEDs would glow very dim then.
    I think the easiest way to get 12V, while using a 6569 or 6567 VICII, is to solder the 12V cable on top of the jumper and afterwards set it, as required, to 12V.
    Another way could be, that you fiddle the 12V cable between the 12V pin and the jumper.

    Thanks Bitte melde dich an, um diesen Link zu sehen. , I served much the tip , I am so temporarily , it sure will put a hose or something to give
    better appearance


    There are different possible ways to connect the LED-Stripe with the board. I've used the 12V line of the VIC pin header (the pin the arrow is pointing to) and the GND line of the Power-LED pin header (the middle pin).

    _____ +12V ______________ GND
    Bitte melde dich an, um diesen Anhang zu sehen. Bitte melde dich an, um diesen Anhang zu sehen.

    Using the Old Vic, I think just in that place I have placed the jumper for the Old Vic 12v would be enough if I put the cable in place 5v? or perhaps not given enough energy

    This thin strip belongs (I think) to the front of the keyboard. I've attached it with three short pieces of double sided adhesive tape.
    Bitte melde dich an, um diesen Anhang zu sehen.

    Thanks for the fast answer Zipcom , I think it is good idea to use double-sided tape, was the last piece to assemble it all, also think whether it is good idea to use glue, but not if remain good, or stick with glue the base, so it could disarm it in the future for updates , I stopped thinking like they did to paste other people , sorry bad english too

    Hello people! , I have a question, and I have almost completed the assembly of the cabinet, but I'll doubt that the manual is in German and can not speak German, so I could put together viewing parts, seeing this photo, I could assemble the accessory above and is screwed, which has holes, but the long table below to know where I could not join him, marked in red, some help? ,.. Thank you

    Thanks for the tip!, this cable comes in the old phone looks great, it's a good idea, I'll see if I get it , I had to cut down the corrugated pipe, it would not look good.

    i was watching this option, but not very accurate, continued searching

    Bitte melde dich an, um diesen Link zu sehen.

    GrĂĽĂźe!

    Thierry

    Hello Thierry,

    there is no corrugated pipe.
    This is a part of a simple coiled single wire.
    It is like the coiled wire you may know from a telephone handset cord.

    See the 3rd picture for example. It was a wire like this.

    Saludo
    Andreas

    Hello Jerrymaus, which measures has the corrugated pipe?

    Thierry: If you can write in english, it would be easier to understand what you mean. The (automatic ?) translation seems a little bit to inaccurate.

    Or write in spanish, then we try to translate better.
    O escribir en español, entonces tratamos de traducir mejor.
    (Bitte melde dich an, um diesen Link zu sehen.)

    so long FXXS

    no problem! Better I understand so well that I mean


    Anschluss Bitte melde dich an, um diesen Anhang zu sehen.

    4. Außerdem hat er mir ein rechtes Seitenteil gemacht dass kein so riesiges Loch um die kleine Netzteilbuchse vom C64r frei lässt.
    Vorher Bitte melde dich an, um diesen Anhang zu sehen. Nachher Bitte melde dich an, um diesen Anhang zu sehen.

    Das tut weh, und kaufte mir, aber es fĂĽr Commodore Bau 64R interessant ist, muss ich fĂĽr dieses staub- kaufen