I created a new C64 cartridge with 19 utilities in a 128 KB ROM. Installed reset button.
Video: http://www.veoh.com/watch/v1295609256k2ea5Gp
1-- 15× turbo. 15× speed load with 1541. 202 blocks file, 50 KB, $0801-CFFF=max. length load 8s. With normal 1541 speed 126s. 32 KB file load 5s.
2-- Gigaload. 14× speed load with 1541, $0400-F400, max. 60 KB. 202 blocks file (50 KB, $0801-CFFF) load 9s, 227 blocks file 11s.
3-- Fastload. 6× speed load with 1541, 1571, $0801-FFFF, max. 62 KB. 250 blocks (62 KB) file load 28s.
4-- Duplicator 2. Fast long file copier with 1541. Fastformat under 12s. Max. 221 blocks file, 221 blocks load 24s, save 25s.
5-- Quick file copier. Supported devices 1541, 1571, 1581, 256 KB 1764 REU, 1, or 2 drives. Pass 1 max. file length 146 blocks. With 1541 146 blocks read 16s, write 17s, 250 blocks read 24s, write 26s (pass 1-2). Source 1541, target 1571, 151 blocks copy 40s. Source 1581, target 1541, 134 blocks copy 25s. Source 1571, target 1541, 134 blocks copy 32s.
6-- Single data copier with 1541, 1571. Source 8, target 9 possible, not work simultaneously. 35 blocks disk copy in pass 3, track 1-35 read 52s, write 54s.
7-- Dual data copier with 1541, 1571, required 2 drives. The 2 drives work simultaneously, 35 tracks disk copy 39s.
8-- Disk manager. Disk commands, header+ID, disk protect, re-new, error scan, disk monitor, dir organizer, prg address, view BAM.
9-- Disk demon. Advanced disk operations, fast diskscan (37s) track 1-41, formatting 1-41 tracks, killertracks, halftrack, disk header (SGN, CHK parameters), disk editor, sector cure, dec-hex, etc.
0-- Turbo assembler. Manual. http://www.fairlight.to/docs/text/tass_docs.html Easy assembly programming, raster routines, etc.. 1541, 1571, 1581 OK.
a-- S-Mon V3.0. Assembler, disk monitor, floppy drive monitor.
b-- S-Mon manual is in the video.
c-- Cross-linker V2.0. Packer+linker, source file max. 250 blocks (62 KB), source max. 16 file. 250 blocks Krakout II pass 1 29s + loading + packing 75s + 32s (saving)=136s, 203 blocks. 1541, 1571 OK.
d-- Byte boiler 256 KB V1.0. This is the best cruncher to C64. Required 256 KB 1764 REU. $078A-FFFF, max. 225 blocks. With Cross-linker packed 203 blocks Krakout file load 21s + packing 120s + save 15s = 156s, 110 blocks. 1541-1571 OK.
e-- Beta dynamic compressor. This is a super cruncher, max. 243 blocks. With Cross-linker packed 203 blocks Krakout file loading + crunching + saving = 49 minutes, special mode, 113 blocks. 1541, 1571, 1581 OK.
f-- Turbo 250 tape turbo. Max. $0801-FF3A = 61,8 KB = 249 blocks. 12 KB Double breakout load 27s, 44,6 KB load 106s, 431 byte/s.
g-- SCT2D = Spectacular Copy - Turbo to Disk V2.0. Fastsave turbotape to 1541, 1581 drives with fast I/O routines, and mass storage devices (IDE64, etc.), device number 8-12. Supported Dolphindos, Jiffydos. Max. 238 blocks. Built in Head align 1.1 by Enthusi. Save Double breakout 12 KB, 49 block, fast 1541 mode 5s, 180 blocks 21s.
h-- Fast save 630 bytes, 1416-2046 ($0588-07FD), 3× speed with 1541, 1571. 62 KB, 250 blocks ($0801-FFFF) save 55s. Usage: POKE 183,file name length, 187,file name address low byte, 188,file name address high byte, filename, 172,start address low byte, 173,start address high byte, 174,end address+1 low byte, 175,end address high byte, 254,load address low byte, 255,load address high byte, SYS 1416 save. Example, save $0801-FFFF, load to $0801, filename "A" on 2047: POKE 183,1:POKE 187,255:POKE 188,7:POKE 2047,65:POKE 172,1:POKE 173,8:POKE 174,0:POKE 175,0:POKE 254,1:POKE 255,8:SYS 1416
i-- Rasterbar designer. Easy rasterbar creator, look intro. Control with joy 2, max. 256 rasterlines, load, save ($2B00)
j-- CIA diagnostic. 2×6526 CIA chip tester with joy 1-4 test.