Kann mir jemand beim Konfigurieren der Indivision MK2 helfen?
Ich habe diese Modi konfiguriert:
Code
- mode "NTSC" vga¹ "1280 x 400 60Hz"
- ¹ Clock 49.886
- ¹ Horizontal: Front Porch 66 | H-Sync 128 | Polarity negative | Back Porch 190 | Pixles/Line 1280
- ¹ Vertical: Front Porch 1 | V-Sync 3 | Polarity positive | Back Porch 40 | Lines 454
- Horizontal: H-Offset 72 | Width 1280 | Double S-Hires
- Vertical: V-Offset 23 | Height 200 | Lines ( 50%)
- Output VGA | V-Sync off
- mode "NTSC interlace" vga² "1280 x 800 60Hz"
- Horizontal: H-Offset 72 | Width 1280 | Double S-Hires
- Vertical: V-Offset 46 | Height 400 | Lines (100%)
- Output VGA | V-Sync off
- mode "PAL" vga¹ "1280 x 512 75Hz"
- ¹ Clock 71.266
- ¹ Horizontal: Front Porch 16 | H-Sync 144 | Polarity positive | Back Porch 248 | Pixles/Line 1280
- ¹ Vertical: Front Porch 1 | V-Sync 2 | Polarity positive | Back Porch 23 | Lines 537
- Horizontal: H-Offset 72 | Width 1280 | Double S-Hires
- Vertical: V-Offset 14 | Height 260 | Lines ( 50%)
- Output VGA | V-Sync off
- mode "PAL interlace" vga² "1280 x 1024 75Hz"
- Horizontal: H-Offset 72 | Width 1280 | Double S-Hires
- Vertical: V-Offset 29 | Height 512 | Lines (100%)
- Output VGA | V-Sync off
- ¹ = custom mode
- ² = MK2 presetting
Nun möchte ich gerne eine Workbench Auflösung von 800x600 oder 1024x768 verwenden.
Dazu habe ich mir den "Superplus: High Res Lac" Treiber genommen.
Wenn ich diese Einstellung verwende ist der Sichtbare Bereich jedoch kleiner als die Auflösung. Er geht über den Bildschirmrand hinaus.
Desweiteren habe ich bei WHDoad Spiele ein sehr gestauchtes Bild.