Hi All.
EF3 USB Utilities 1.91 is released which can do two things:
1. When C64 is in EF3 Menu mode you can use "b" command to flash a CRT file on the EF3. It is the same as using CRT Flasher in the EasyTransfer tool.
2. TAP file Reader. This will Read the tape on the C64 side and transfer it to the PC over the USB. Before you start the command position the tape, then run the ef3usb m file.tap command and start the tape on the C64 side. To stop reading the TAP file first stop the tape and press RUN/STOP on the c64.
This version has a fixed TAP Reader compared to the version 1.9 which had a bug (pc side was outputting too much to the console and it could make the buffer overrun).
When reading a TAP file it is advised that you leave the PC without too many programs multitasking and you keep the command line window in front. Because this is timing critical.
Link:
http://csdb.dk/release/?id=144975
Hope it will enable more people to create TAP files now.
